Če je samo za odpiranje zapiranje naj bi bilo tole dovolj:
1. Turn the Ignition OFF.
2. Press the central door locking button for more than 5 seconds. Note: the door should lock then unlock.
3. When this happens, 10 seconds is allowed and the immobiliser warning light illuminates.
4. Point the 1st key at the receiver and press the button twice, the doors should lock and unlock. Repeat for other remotes as required.
5. Check the remote control unlocks and locks the doors.
V nasprotnem primeru se bo pa treba hecati z CLIP-om in računati kode.
Obstaja še malo spremenjena varianta zgornjega postopka:
I inserted the key into the ignition and turned ON the engine.
I then turned OFF the engine leaving the faulty ignition key in place in the ignition.
Then I pressed the central door locking button for just over 10 seconds and after the 10 seconds (keeping my finger on the central door lock button) I pressed the LOCKING button on the key (still in ignition) twice.